The HueForge model from the HueForging Color Aware: Color Shift Tutorial
Here are the swap instructions, but I've included the source images too so you can color it yourself in HueForge!
Project: Female Superhero Color Aware Tutorial.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 166.48x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Starlight Neptune Transmission Distance: 2.8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Paramount 3D Iron Red Transmission Distance: 2
PLA PolyLite Wine Red Transmission Distance: 1
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to Starlight Neptune
At layer #16 (0.76mm) swap to Jade White
At layer #21 (0.96mm) swap to Black
At layer #25 (1.12mm) swap to Iron Red
At layer #29 (1.28mm) swap to Wine Red
At layer #31 (1.36mm) swap to Yellow
At layer #32 (1.4mm) swap to Jade White
At layer #38 (1.64mm) swap to Black
At layer #41 (1.76mm) swap to Iron Red
At layer #43 (1.84mm) swap to Orange
At layer #45 (1.92mm) swap to Jade White
At layer #46 (1.96mm) swap to Yellow
At layer #51 (2.16mm) swap to Jade White for the rest.
The author marked this model as their own original creation.