Elegant trash bin

Small, elegant trash bin. Suitable, for example, on the breakfast table.
Diameter/height of the bin: 143/179mm.

I printed the bin with Fuzzy Skin. It looks fantastic!

To attach the knob, you need an M4 nut and an M4x12 or M4x14 or M4x16 flat head screw.

Printing information

All STL files are correctly aligned.

Layer height: 0.2mm
Perimeter: 3
Infill: 15%
Support: none

To insert the nut during printing the knob, define the following print pause in the slicer:

• at Layer #39 (7.80 mm)

If you want to use Fuzzy Skin, read here how you can set it up in Prusa Slicer:
https://help.prusa3d.com/article/fuzzy-skin_246186

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.