Wood lathe version 3

V3 of my wood lathe, and probably the final version for a while. works really well! Ive turned 20cm long square blanks with no problem.

Video with more details: https://youtu.be/SEXzAz78ZC4

Build video: https://youtu.be/iUjqbcIMym0

making something on it: https://www.youtube.com/watch?v=sA\_-kHdlTJE

A pretty extreme test on it: https://youtu.be/28JJMNb0\_EA

Basic non printed parts list:
~=rough measurment, im away when writing this

6mm rod, for tool rest, ~28cm
5/32nd rod, for slide, 2-3, 27cm

Headstock:
er11 collet chuck, 5mm bore.
5mm rod, to mount collet chuck. ~10cm
4 10mm OD bearings, 5mm ID.
4 10cm lengths 3/16th threaded rod + 8 nuts
1m220mm bolt, or 2mm rod + glue

Tailstock:
2*10mm OD bearings, I use 6mm ID but you could use 5mm if thats easier

3mm thick aluminium plates, 3.

5mm*50mm bolts, 4, + 4 nuts

As said, ill be making a build video soon.