Modular Filtering funnel | Resin printing

Modular Filtering funnel | Resin printing

A modular filtering funnel to manage resin removal from the vat. With interchangeable filter design.

Features

• Interchangeable filter interface
• Large filter module
• Reduction filter module

Needed items:

• Paper filters for resin filtration or wedding favor mesh bag or thin nylon mesh fabric

Instructions

Making the filter

Prepare before printing

• If you use paper filter just remove the mesh from the paper cone.
• If you have wedding favor mesh or mesh fabric just cut a square around 50/55cm

Then

1. Print the resin_filter part with a programmed pause around 1mm height. 
2. When print pauses lay the mesh on the part and hold it firmly with paper tape on the sides. Ensure that is laying in tension and adherend on the plastic part. 
3. Continue the print.
4. Done

Print Settings

• Layer height:
• Material: PETG