"Real" Trombone Champ trombone controller mount

A mount for a button, switch, Arduino, pressure sensor and a time of Flight sensor on a trombone.
0
8
0
171
updated May 26, 2024

Description

PDF

A mount for a button, switch, Arduino, pressure sensor and a time of Flight sensor on a trombone to be used to play the game “Trombone Champ” with a real trombone.

See Git hub for more information, BOM, and the code used with the build.

https://github.com/Gearomatic/Real-Trombome-Champ



 

 

 

Trombone Champ Controler V04.0  For Pro Micro + Python  Controls the mouse based on the results from a VL53L1X sensor mounted on a trombone.  Hardware:  - Arduino Pro Micro  - VL53L1X TOF Sensor  - MPXV7007 Pressure Sensor  - Momentary Push Button  - Toggle Switch    The mouse movement is calibrated for a 1440X2560 monitor. You will need to modify the code to fit other screen sizes.  See the "Serial.println((distance*4));" at the end, Modify that multiplier (default is 4) Try 2 for 1080 Height screens?  WARNING: When you use the Mouse.move() command (in python in this case), the Arduino/python takes over your  mouse! Make sure you have control before you use the mouse commands. Flipping the switch on pin 5 to ground should stop the flow of data to python and give you mouse control back  this can be used to select levels or quit the python code.  If all else fails, unplugging the usb cable should return mouse control to you as well.  Created 2022 - 10 - 10  Modified on 2022 - 10 - 24  By Gearomatic      Used code from:  Reading distance from the laser based VL53L1X  By: Nathan Seidle  SparkFun Electronics

 

Tags



Model origin

The author marked this model as their own original creation.

License