K1(C-Max) Bowden Tube Guide for Nu-K Riser (et similia)

I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain).

I suppose that it should fit on the K1 Max cablechain too.

Added the SolidWorks project too for those who want to adjust the clip's clearance (I've designed the clip to vibrate the less possible so when placed needs a good amount of force).

EDIT: an user reported that he broke the guide chain trying to attach the clip on it. As I wrote, the clip is designed to be absolutely tight and rigid so as not to introduce further vibrations. So, be careful when hooking it to the guide chain. It is necessary to apply a certain amount of pressure/force, but it is up to individual common sense to understand when it is necessary to stop and review whether the dimensions of the printed model and those of the chain are not, more than narrow, incompatible. I am not responsible for any damage caused to your machines by careless use of my model.

Changed the way the clip attaches to the chain, lowered the guide height, added more tolerance for the tube hole.