With the base part you can mark the basic shape and the neckline on the leather comfortably. The additional slot with the two integrated holes serves on the one hand for the exact positioning of the two round seam holes existing at the corners, on the other hand the line for the upper seam part can be marked.
The smaller part serves to mark the cutout on the leather for the inlay. The size of the part is chosen so that it is larger than the outline of the seam line, but smaller than the edge of the base part. This gives the inlay exactly the required size to be sewn in but not visible at the edge.
The third part is a small drop-shaped bar, which gives the cutout for the key ring. This bar is also used to mark the area where no glue is applied.
I designed it with FreeCAD, the files are included.
Just for the record: the shown blue leather is not an exotic leather. It is the recycling of a by-product that is otherwise thrown away: Chicken leg leather, the tanned skin of the leg of a slaughter chicken.
-- German --
Template für einen Schlüsselanhänger mit Inlay.
Mit dem Basisteil kann man die Grundform und den Ausschnitt auf dem Leder bequem anzeichnen. Der zusätzlich vorhandene Schlitz mit den zwei integrierten Löchern dient zum einen zum genauen Positionieren der beiden an den Ecken vorhandenen runden Nahtlöchern, zum anderen kann die Linie für den oberen Nahtteil markiert werden.
Das kleinere Teil dient zum Anzeichnen des Ausschnitts auf dem Leder für das Inlay. Die Größe des Teils ist so gewählt, das es größer ist, als der Umriss der Nahtlinie, aber kleiner als der Rand des Basisteils. Hierdurch bekommt das Inlay genau die benötigte Größe, damit es mit eingenäht wird, aber nicht an der Kante sichtbar wird.
Der dritte Teil ist ein kleiner tropfenförmiger Balken, der den Ausschnitt für den Schlüsselring ergibt. Mit Hilfe dieses Balken wird auch der Bereich markiert, auf den kein Kleber aufgetragen wird.
Konstruiert habe ich es mit FreeCAD, die Dateien liegen bei.
Rafts:
No
Supports:
Doesn't Matter
Infill:Doesn't Matter
Category: OtherThe author marked this model as their own original creation. Imported from Thingiverse.