Diamond Art Roller 40mm

This is a roller for diamond art with a diameter of 40mm.

Most of the ones on the market are 30mm, and I wanted one that allows more beads to be attached, so I created the data.

Attach the printed parts to the tip of a diamond art pen with a hole at the tip.

When printing, place it on the floor in the direction shown in the reference image.

When finished, pinch the tip of the model between the rings slightly so that the tip is slightly inward (this will pinch the rings nicely).

If possible, print at 0.1 mm per layer. (to apply pressure while working).

The rings are made approximately 2.4 mm wide.

ーーーーーーーーー

2024/07/26

The bar model has been updated.