Case for ZWO ASI290MC

This is a case to store the ASI290MC imaging camera with the 1.25" nose-piece attached and the USB3.0 cable winded up neatly. I've it case so I won't have to unscrew the nose piece every time I want to put the camera into the box it came delivered with.

When printed with 0.15 layer height the lid will fit perfectly and the case can be picked up by the lid, the bottom will only slowly drift out. I've added a foam padding made from the foam that came with the original box.

The case will most likely hold other similar cameras from ZWO, dimensions are:
Inner diameter (where the camera sits): 64mm
Height (incl. 5mm for foam padding): 70mm

There's a version of the lid for single colored prints without logo.

Print these parts for single color:

• bottom_asi290mc.stl

• top_single.stl Print these parts for lid with logo:

• bottom_asi290mc.stl

• top_asi290mc.stl

• all other lettters and numbers with _asi290mc.stl in the name See print settings for detailed slicer settings.

  Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2 MMU

No

Supports:

No

0.15

Infill:

25% Rectilinear

Notes:

I've used these settings in Slic3r:rn- Layer height: 0.15mmrn- First Layer height: 2mmrn- Perimeters: 6rn- Solid Layers top/bottom: 3rn- Bottom Fill Pattern: Hilbert CurvernrnQuality Settings:rn- Extra Perimeters if neededrn- Ensure vertical shell thicknessrnrn