"Lockpin" for dethleffs habitation door lock'
Gasket for the outside, best to print with TPU
The lockpin can be printed with PLA
If the lock pin is too tight, just use a sandpaper and sand it a little.
There are 2 files, one with a inner diameter of 9.5mm and 9.7mm
The 9.5mm is a little tighter.
Printer Brand:
FlashForge
Printer:
Guider II
**Rafts:** NoSupports:
No
**Resolution:** 0.15Infill:
100
**Filament:** [ ](http://www.amazon.com/s?url=search-alias&field-keywords=Sainsmart%2C+Esun+eSun+PLA+%2C+Sainsmart+TPU&tag=thingiverse09-20)[ Sainsmart](https://www.amazon.com/s?k=sainsmart+tpu&crid=3NNGOYNC66TOK&sprefix=sainsmart%2Caps%2C184&linkCode=ll2&tag=thingiverse09-20&linkId=430114ae5898999a326a15425fb17151&language=en_US&ref_=as_li_ss_tl), [ Esun](https://www.amazon.com/s?k=esun+filament&linkCode=ll2&tag=thingiverse09-20&linkId=ee95e18399f58ca8cf2c8c2b4b912c0c&language=en_US&ref_=as_li_ss_tl) [ eSun](https://www.amazon.com/s?k=esun+filament&linkCode=ll2&tag=thingiverse09-20&linkId=ee95e18399f58ca8cf2c8c2b4b912c0c&language=en_US&ref_=as_li_ss_tl) PLA , [ Sainsmart](https://www.amazon.com/s?k=sainsmart+tpu&crid=3NNGOYNC66TOK&sprefix=sainsmart%2Caps%2C184&linkCode=ll2&tag=thingiverse09-20&linkId=430114ae5898999a326a15425fb17151&language=en_US&ref_=as_li_ss_tl) TPUNotes:
PLA For the lockpin,
TPU for the gasket on the outside
Custom Section
==============
9.5mm
9.7mm
Category: AutomotiveThe author marked this model as their own original creation. Imported from Thingiverse.