Can you add the corner bracket? I've tried to locate them in the 2 other project you've pointed out but to no avail.
Plus it would be nice to know what hardware you've used to secure the corner pieces (screw type). Personally, I've inserted M4 heat insert in the little side bracket and screwed in M4*16mm bolts.
@SnifMyBack_2220693 Hiya. It's actually a remix of Tony F's riser that has the corner bracket - here it is Fastener for NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents) by michel jubault | Download free STL model | Printables.com
@SnifMyBack_2220693 My own corner fastner with heated insert is on my models page. I think I used M4x12 or 16 bolts. Just make sure that they don't protrude too far
Can you add the corner bracket? I've tried to locate them in the 2 other project you've pointed out but to no avail.
Plus it would be nice to know what hardware you've used to secure the corner pieces (screw type). Personally, I've inserted M4 heat insert in the little side bracket and screwed in M4*16mm bolts.
@SnifMyBack_2220693 Hiya. It's actually a remix of Tony F's riser that has the corner bracket - here it is
Fastener for NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents) by michel jubault | Download free STL model | Printables.com
@SnifMyBack_2220693 My own corner fastner with heated insert is on my models page. I think I used M4x12 or 16 bolts. Just make sure that they don't protrude too far