Works as intended, no trouble w/printing.
Material: PETG
Layer height: 0.1 mm
Extrusion multiplier: 1.05
Gravity watering, I dind't need any o-rings to reduce leakage, but my hoses (both 1/2" and 3/16") fit really tight. (edited)
Adjustable irrigation sprinklers for 4.6mm irrigation hose
Adjustable irrigation sprinklers for 4.6mm (3/16") hose with adapters from 1/2 Garden hose
21
107
1
805
updated May 19, 2024
Makes
Comments
@kszyh_430471 , Nice! Glad you liked them! :) A tip is to put the hose end in warm water a couple of minutes before connecting them. Then they become really easy to slide on and becomes water tight.