Add-on clip for micro servos to provide strain relief for the servo wires. I've provided two versions of the model, one for cable-wrapped wires and one for exposed wires. Use a small zip-tie to secure the wires and an M3 x 10mm screw and M3 nut/locknut to secure the part to the servo body.
This was the servo the part was modeled on: https://amzn.to/3cfUJhp
(Mentioning because I found the body to beslightly larger than nominal micro servo dimensions by .25mm)
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:No
Supports:
No
Resolution:.2
Infill:
25%
The author marked this model as their own original creation. Imported from Thingiverse.