Improved Fire Alarm Pull

CoolNamesAllTaken did a great job designing this piece, but I didn't need it as a light switch-- I needed it for a little boy that wanted one as a toy. The tolerances on the original were WAY too tight, and if the piece isn't mounted on a light switch, then it doesn't stay together. I needed it to slide freely and not come apart.

I adjusted the slide to have more clearance to fit in the body. I also added a channel on one side and a hole for an M3x16 screw on the body to lock the slide into the body. A cap head M3 bolt should thread into the hole.

If you would still like to mount it to a wall, I would recommend doublestick tape or 3M Command strips.

Print Settings

Printer:

Artillery Genius

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

15%

Filament: IIID MAX PLA+ Red/White

Notes:

Printed the base and slide in red, with a filament swap to white for the lettering.

Supports are required on both parts for the grooves and inserts.

Category: Interactive Art