#0158 Water Bottle Ring/Carrier

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!  

**********

This water bottle ring is designed to be used with some of my BX Loops to attach it to your backpack for a no-hand carry.

Features:

1. Quick easy print - fits a typical 24 oz (700 mL) water bottle with a cap that is bigger than 85mm in diameter.
2. Easy to attach if you use any combination of my STRONG key rings (use the small version)
   a) https://www.printables.com/model/649764-strong-round-split-key-ring-3-sizes
   b) https://www.printables.com/model/602669-strong-split-key-ring-meets-the-demands-of-everyda
   c) https://www.printables.com/model/621205-even-stronger-split-key-ring-and-uses-less-filamen 

3. Also print one of my carabiners to quickly attach to the backpack.

         a) https://www.printables.com/model/229437-rugged-d-carabiner
         b) https://www.printables.com/model/425480-action-carabiner-lets-do-this
         c) https://www.printables.com/model/378859-rugged-carabiner-5-with-a-message

4. Quickly remove your bottle from the ring to take a drink.

Printing Recommendations:

1. No supports needed.
2. Use PETG/ABS/ASA
3. PLA is not recommended.

NOTES about attachment: 

1. Please refer to the picture to guide you on attachment points.
2. If you carry it on the back side, I recommend that you tether the ring at 2 attachment points to limit any swinging around of the bottle when being carried on the backpack.
3. If you carry it on the front, one attachment point is good enough for daily use and super quick access to the water bottle.
4. With this design, you can, of course, carry as many water bottles as you'd like. :-)

**********

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.