{"data":{"model":{"id":"882156","slug":"lowrider-v3-jackpot-cnc-controller-board-case-with","name":"LowRider v3 Jackpot CNC Controller Board case with 25mm added room, plexiglas window, optional keystone jack slot v2.0","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":2,"description":"

NOTE: This is v2.0. If you were looking for v1.0 or 1.1, click below:

New in this version:

The main new option here is the keystone jack slot in the base. This can be used with, for example, an ethernet jack for quick connect / quick disconnect. This was suggested by V1E maker @MakerJim.
As suggested by V1E maker @MakerJim, the M3 screw holes for mounting the Jackpot board are now clear through, to allow use of more various lengths of screws.
As suggested by another V1E maker sometime back, there is now a lid option with a cross-bar support spanning the gap at the top of the print to prevent racking during handling before gluing in a clear plexiglas lid. Also, as of May 20, 2024, the bracing of the cross-bar is now moderated down to a 50 degree slope (it used to be steeper) which should help it print more easily without need of supports.

Why v2.0 instead of 1.2?

Because the new 2.0 lid does not work with the old 1.2 base, and because the new 2.0 base does not work with the old 1.2 lid.

I made a v1.0 (or v1.1). Should I do this one?

Not unless you're just dying to have the new keystone jack slot. Otherwise, nothing to gain, really. The other changes here are minor.

I did not make a v1.0 or v1.1. Should I do this one?

Yes. Nothing missing here, more options, nothing to lose with this new v2.0.

Do any of the parts from v1.0 or v1.1 work with v2.0?

Well\u2026 not really. Sure, the clear plexiglas skylight window in the lid is still the same design. But\u2026 you probably glued in your skylight window with v1.0 or v1.1, so reusing it is not workable.

Below is a copy and paste of the description from the v1.1, which still applies, pretty much:

Note: As of Nov 16, 2023 \u2014 in addition to the earlier remix changes, today I added SVG files for engraving the plexiglas window to add logotypes for \u201cLowRider 3\u201d and \u201cV1 Engineering\u201d and/or \u201cLowRider 3\u201d and \u201cV1E\u201d and \u201cDesign8Studio.\u201d The engraving can be done by laser (as I did, using my CO2 laser) or by V-bit on the CNC (as shown in a make by @Dgkeith237) \u2014 I added options for engraving before installing the window and after installing. The difference is the size of the outline rectangle, which, if you already cut your window, should be used only for placement and alignment before engraving the logotypes. Here are the graphics options now included:

With V1E, LowRider 3, and Design8Studio logotypes.svg:

With V1E, LowRider 3, and Design8Studio logotypes (for engrave after install).svg:

With V1E, LowRider 3 logotypes.svg:

With V1E, LowRider 3 logotypes (for engrave after install).svg:

I laser engraved the lid, using a 100W CO2 laser, at 300 mm/sec, with 45% power.

When cleaning away the debris, avoid use of astringents, etc (including avoiding alcohol and WD-40 or the like) as it will cause micro-fracture cracks in the edges of your engraving. I made this mistake (alcohol), but then was able to correct it with careful use of a heat gun. Be careful with a heat gun, as you can overheat it and cause bubbles and ripples and ruin the appearance. I did not make the latter mistake this time, but I had made that mistake before on another project. (Open sharing of mistakes will hopefully prevent someone else from making the same ones.)

Changes in this \u201cv1.1\u201d remix:

Change to the BASE:
- Created some additional space for wiring by trimming out some unneeded thickness leftover from the previous \u201cadd 25mm\u201d remix. i.e. \u201cTrimmed some fat.\u201d

BASE \u201cbefore\u201d - v1.0:

BASE \u201cafter\u201d - v1.1:

Changes to the LID:
- Made the \u201cwindow sills\u201d a little bit deeper, to make it easier to hide any unsightly glue that would otherwise be visible after attaching the window, and to allow more forgiveness if the acrylic window piece happens to get cut less than perfectly.
- Added notches at the bottom of the lid, so wiring can pass there instead of being \u201cthreaded through a hole\u201d \u2014 allowing the lid to be installed / removed without having to deal with wiring in the process, and without disturbing wiring. See my comment below from over here:

In my various remixes for the SKR cases, I notched the bottom of the lid so that it could be removed without threading wires through holes, and just now I had to manually make cuts in this lid to create a notch at the bottom, so that trunk of wires could exit without binding between the Jackpot and the lid.

LID \u201cbefore\u201d - v1.0:

LID \u201cafter\u201d - v1.1:

All the remaining info is copied and pasted from the \u201cv1.0\u201d release (except the photos / renders are updated):

LowRider v3 CNC: new Jackpot board getting its heat sinks installed:

Just finished my remix work on a Jackpot case / control board box that combines Ryan's @vicious1's excellent design, with @Tokoloshe's great idea of a plexiglas window on the lid, combined with @Jonathjon's great idea to extend the length by 25mm for room for his add-ons.

A couple of bits of extra work I did is that now it no longer needs a corner ground off as with @Tokoloshe's original, and I went ahead and made a mirrored version since I will need mine to have the board's ports facing the X-max side instead of X-min. Also, because the \u201changer\u201d on Ryan's original was a teensy bit too tight to fit on my \u00bc\" plywood strut (which is probably thicker than it\u2018s supposed to be), I widened the hanger's reach by 1.5mm.

Also, I have added a choice of bases \u2014 one with and one without accommodation for a 40mm cooling fan \u2014 in case someone already has one on hand to use, or considers it important enough to get one and add it.

I am astounded with how much smaller this case is than the ones for the BTT SKR.

I'm currently printing mine, but below is a preview from 3D renderings.

FAQ:

- - - -

Q: Where can we buy the Jackpot CNC controller board?

A: You can buy the Jackpot CNC Control Board (a FluidNC board, which is GRBL compatible) here: https://www.v1e.com/products/jackpot-cnc-controller

- - - -

Q: Which cooling fan did you use for this board?

A: I used a super quiet Noctua brand 40mm cooling fan. Here is an affiliate link to the one I am using: https://amzn.to/3ubq2YY

- - - -

Q: One of the case base options has a spot for a 40mm cooling fan. Where does that get wired to on the Jackpot board?

A: One of the easiest and best ways is to not connect the fan to the board, but directly to the power supply that feeds the board, since the volts must match anyway. Nevertheless, I connected mine to the board. [UPDATE: Well, I soon afterward decided that rather than turning the fan on by a button press (or gcode), I\u2019d rather have it come on automatically when the unit is powered up, so I re-ran my fan wires, and tied them into the main 12V power lines. Now my fan is \u201calways on.\u201d] The Noctua fan that I used runs on 12 Volts. However, the method I used can work with fans made for either 24V or 12V. \u2014 The key is that your fan's voltage must match the main power supply voltage. (Most people will be using 24V power, so that would mean the fan needs to match the power supply, at 24V.) \u2014 I connected my fan straight to a spare \u201cMOSFET\u201d port on the Jackpot board (which, again, will match the power supply, presumably either 12V or 24V), so that every time the LowRider gets switched on, the fan comes on. It doesn\u2019t do temperature monitoring for going on and off. It stays on whenever the LR3 is on. It was simpler for me to do it that way. Please see the port options highlighted on this schematic:

Q: How do I enable / switch on the MOSFETs on the board?

A: Click here for\u2026 Details for switching on/off the MOSFETs via either Web-UI buttons or in GCode.

- - - -

Keystone Jack Slot to left of cooling fan:

Keystone Jack Slot to right of cooling fan:

Change log:

May 16, 2024 \u2014 updated to v2.0. Added optional keystone jack slot, added a full width brace on the lid, and made board mount screw holes in the standoffs to be full through holes, to accommodate more various lengths of M3 screws.
Nov 16, 2023 \u2014 in addition to the earlier remix changes, today I added SVG files for laser engraving the plexiglas window, to add logotypes for \u201cLowRider 3\u201d and \u201cV1 Engineering\u201d and/or \u201cLowRider 3\u201d and \u201cV1E\u201d and \u201cDesign8Studio.\u201d

","category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","description":"Perfect tools and accessories for DIY enthusiasts or handicraftsman professionals. Table clamp, CNC machine parts, screw measuring tool, or multipurpose ruler.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-13T20:09:38.343911+00:00","firstPublish":"2024-05-17T02:15:24.258853+00:00","datePublished":"2025-02-13T20:09:38.298326+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"LowRider v3 Jackpot CNC Controller Board case with 25mm added room, plexiglas window, optional keystone jack slot!","likesCount":15,"makesCount":1,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":139,"displayCount":627,"filesCount":15,"privateCollectionsCount":4,"publicCollectionsCount":21,"pdfFilePath":"media/prints/882156/pdfs/882156-lowrider-v3-jackpot-cnc-controller-board-case-with-25mm-added-room-plexiglas-window-optional-keystone-jack-slot-v20-5d7e665a-220a-4f7c-9f66-517be2736070.pdf","commentCount":5,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"3145302","filePath":"media/prints/882156/images/6762262_3f15f068-14c8-4692-970b-057d613e4839_e38c29f7-3802-47f8-b98e-d164b28d7ba5/img_6350.jpeg","rotation":0,"imageHash":"F1kGFYZUt6v4mXd0nHlnZlPQegB5","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"images":[{"id":"3145302","filePath":"media/prints/882156/images/6762262_3f15f068-14c8-4692-970b-057d613e4839_e38c29f7-3802-47f8-b98e-d164b28d7ba5/img_6350.jpeg","rotation":0,"imageHash":"F1kGFYZUt6v4mXd0nHlnZlPQegB5","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"3145303","filePath":"media/prints/882156/images/6762264_472431cd-9e5e-4f1c-b1af-9a61a5cdaa48_f34e431d-6428-4029-bc32-46d986a79d26/img_6351.jpeg","rotation":0,"imageHash":"mTgKFYhal5mfZYdWdzZ4eQNwMiAG","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"3157807","filePath":"media/prints/882156/images/6789195_845191ce-36da-4874-ab26-fe85685dbeae_2f75993e-0048-4945-81f5-8220134c826b/base-no-keystone-screenshot-2024-05-20-at-121738-pm.png","rotation":0,"imageHash":"ISgSDYT2yIl0eIl6d2eHifZYZfo0","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157806","filePath":"media/prints/882156/images/6789196_95834c00-ba94-4024-9fa4-09affccd5ef9_0b62e094-9ed6-4325-a2ca-d04ab79489ba/base-no-keystone-screenshot-2024-05-20-at-121749-pm.png","rotation":0,"imageHash":"ZygWDYb3d1iId4eKdod4eUZvesBn","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157800","filePath":"media/prints/882156/images/6789197_dd1ac17d-4445-4c57-a031-90f17ebea6ee_4cacd2fa-463c-458d-ae0a-f437990b6cc7/base-no-keystone-screenshot-2024-05-20-at-122350-pm.png","rotation":0,"imageHash":"ZTgODYT4l4eIZ4h+dnV4eYCUDFBI","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157801","filePath":"media/prints/882156/images/6789200_a9408f45-4884-46d0-8d2e-19673beeb275_e0ef5945-74c7-420f-9a58-1c2e762e7e9b/base-no-keystone-screenshot-2024-05-20-at-121708-pm.png","rotation":0,"imageHash":"o2gSDYz2p3hnd4d6hmV3aAZwdSBX","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157803","filePath":"media/prints/882156/images/6789199_f70746e8-1162-419a-be4a-415304b556a8_21f97be4-1061-4d9f-b650-0721ee938586/base-keystone-right-screenshot-2024-05-20-at-122547-pm.png","rotation":0,"imageHash":"ZTgODYT4l4eIZ4h+dnV4eYCUDFBI","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157804","filePath":"media/prints/882156/images/6789194_e32a0478-9ab0-41b2-9084-c4b2ac08fe52_a0080fb6-8ec6-4510-a99d-2dfcdcb6773e/base-keystone-left-screenshot-2024-05-20-at-122444-pm.png","rotation":0,"imageHash":"ZTgODYT4l4eIZ4h+dnV4eYCUDFBI","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157799","filePath":"media/prints/882156/images/6789198_ab3a1de5-8eda-4bab-b396-4f10403e2755_d65828cd-b604-4726-b6ab-2d66ba84bd5b/set-2-screenshot-2024-05-20-at-121859-pm.png","rotation":0,"imageHash":"LxgGBYKoh5fZdndvk2iTmoQIUIoQ","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3157802","filePath":"media/prints/882156/images/6789201_db5f2852-a083-4cc7-82d9-0eca93e66f31_c484d000-fb1c-48ef-8793-2524c1db21d6/set-1-screenshot-2024-05-20-at-121238-pm.png","rotation":0,"imageHash":"LBgKBYL3mYp3iIZuZ3aHuAWQZzBZ","imageWidth":2732,"imageHeight":1792,"__typename":"PrintImageType"},{"id":"3145292","filePath":"media/prints/882156/images/6762248_ebb37375-d6a4-4e54-970d-02ef82c4039c_d64ffc3b-4be4-49ef-b1bf-090733be85bb/plexiglas-window-1355-x-745-mm-with-v1e-lowrider-3-logotypes.png","rotation":0,"imageHash":"/vcBBICouImNh3aHh3C3f3X7Nw==","imageWidth":1658,"imageHeight":930,"__typename":"PrintImageType"},{"id":"3145289","filePath":"media/prints/882156/images/6762247_c369f312-f675-4b4f-a22d-e1c702c21a13_2d8437a6-c787-41f4-bdcf-2fa149739e00/plexiglas-window-1355-x-745-mm-with-v1e-lowrider-3-and-design8studio-logotypessvg.png","rotation":0,"imageHash":"/vcBBICpl5d+h4aHiJC4f3j7iA==","imageWidth":1664,"imageHeight":926,"__typename":"PrintImageType"},{"id":"3145290","filePath":"media/prints/882156/images/6762249_14d4677b-3a37-4129-8e77-2299dd01e80e_5e3d376c-64c9-4749-b404-212d1d28077d/plexiglas-window-1355-x-745-mm-with-v1e-lowrider-3-logotypes-for-engrave-after-install.png","rotation":0,"imageHash":"/vcBA4Cop6d/hyaIx49z/Dg=","imageWidth":1660,"imageHeight":812,"__typename":"PrintImageType"},{"id":"3145291","filePath":"media/prints/882156/images/6762250_ce9e0ee2-84be-4f39-8ab2-a8fe4ba14982_65373f01-8c92-41e4-84fc-e19d49a80995/plexiglas-window-1355-x-745-mm-with-v1e-lowrider-3-and-design8studio-logotypes-for-engrave-after-install.png","rotation":0,"imageHash":"/fcBA4CpmJdvh1aIt39hL1k=","imageWidth":1658,"imageHeight":814,"__typename":"PrintImageType"}],"tags":[],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3732507","filePreviewPath":"media/prints/882156/previews/4d8a03ee18f148ba1c2faf84f4f9edcf58d7ff11.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"472284","modelId":"647878","modelName":"LowRider v3 Jackpot CNC Controller Board case with 25mm added room, and plexiglas window v1.1","modelAuthor":{"id":"127223","handle":"design8studio","verified":false,"publicUsername":"Doug Joseph (design8studio)","__typename":"UserType"},"model":{"id":"647878","name":"LowRider v3 Jackpot CNC Controller Board case with 25mm added room, and plexiglas window v1.1","slug":"lowrider-v3-jackpot-cnc-controller-board-case-with","datePublished":"2025-02-13T20:10:04.972659+00:00","image":{"id":"2417838","filePath":"media/prints/647878/images/5122415_cf4503fd-f676-479c-8151-3f2e0fe7d7bb_7ebae249-d71e-4775-8773-fe52d076cfea/img_6351.jpeg","rotation":0,"imageHash":"mTgKFYhal5mfZYdWdzZ4eQNwMiAG","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"4","name":"Creative Commons \u2014 Attribution \u2014 Noncommercial \u2014 Share Alike","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":"

As suggested by V1E maker @MakerJim, the M3 screw holes for mounting the Jackpot board are now clear through, to allow use of more various lengths of screws.
As suggested by a V1E maker sometime back, there is now a lid option with a cross-bar support spanning the gap at the top of the print to prevent racking during handling before gluing in a clear plexiglas lid. Also, as of May 20, 2024, the bracing of the cross-bar is now moderated down to a 50 degree slope (it used to be steeper) which should help it print more easily without need of supports.

","__typename":"PrintType","user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":"5.00","highlightedModels":{"models":[{"id":"865254","name":"LORD OF THE RINGS - Bookends Set (LOTR)","slug":"lord-of-the-rings-bookends-set-lotr","ratingAvg":"5.0000000000","likesCount":637,"liked":null,"datePublished":"2024-09-26T16:04:33.805605+00:00","dateFeatured":null,"firstPublish":"2024-05-02T07:59:40.661582+00:00","downloadCount":868,"mmu":false,"category":{"id":"44","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"44","name":"Home Decor","nameEn":"Home Decor","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-09-26T16:04:33.838491+00:00","image":{"id":"3091942","filePath":"media/prints/865254/images/6643385_ab33e582-3879-4725-8b44-d08d47e4fb79_fad0e1d5-27e2-4c16-b362-b47408ed6682/2024-05-02-lord-of-the-rings-bookends-printables-thumbnail.jpg","rotation":0,"imageHash":"HxkKLYKXl4d5hYWAdolod3iPe/iY","imageWidth":3947,"imageHeight":2910,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"908684","name":"SpaceMouse Mini - Slim profile, with easier assembly and various improvements - v3","slug":"spacemouse-mini-slim-profile-with-easier-assembly","ratingAvg":"4.9000000000","likesCount":594,"liked":null,"datePublished":"2024-06-16T05:23:04.143492+00:00","dateFeatured":null,"firstPublish":"2024-06-10T20:49:12.318410+00:00","downloadCount":1112,"mmu":false,"category":{"id":"27","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"27","name":"Computers","nameEn":"Computers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-06-16T05:23:04.175358+00:00","image":{"id":"3227489","filePath":"media/prints/908684/images/6946747_44bd7480-5652-4c80-9ffb-481707eb4ab4_da791d6a-555b-4c92-8d11-f6695c0973b4/img_8155.jpeg","rotation":0,"imageHash":"HAgKJYT2hHqpmGi9hpaJebBhJglU","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"123802","name":"Push Block v4 (threaded inserts edition) (no supports!)","slug":"push-block-v4-threaded-inserts-edition-no-supports","ratingAvg":"4.8571428571","likesCount":470,"liked":null,"datePublished":"2023-10-18T10:20:43.106955+00:00","dateFeatured":null,"firstPublish":"2022-01-24T18:02:38.924471+00:00","downloadCount":1316,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-10-18T10:20:43.126205+00:00","image":{"id":"614459","filePath":"media/prints/123802/images/1193844_6cff999b-fe25-487a-82f1-372be61e9e90/large_display_1-img_0637_123802.jpg","rotation":0,"imageHash":"W2kKJYz5p4iCdoV7lQV4ikl1sHQH","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1028122","name":"Scratch Attach - Printed, Telescopic Back Scratcher v1.0","slug":"scratch-attach-printed-telescopic-back-scratcher-v","ratingAvg":"4.9166666667","likesCount":413,"liked":null,"datePublished":"2024-10-05T19:12:51.317319+00:00","dateFeatured":null,"firstPublish":"2024-10-04T12:49:48.355527+00:00","downloadCount":1483,"mmu":false,"category":{"id":"45","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"45","name":"Other House Equipment","nameEn":"Other House Equipment","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-10-05T19:12:51.335010+00:00","image":{"id":"3612795","filePath":"media/prints/1028122/images/7803289_26f93c89-df51-45ec-b94f-7148541e068f_13e0ced8-b9f1-4483-bb8a-d80017e68ef9/scratch-attach-printed-back-scratcher.jpg","rotation":0,"imageHash":"LBgGDYJaOWS+hoeQhih5pJX900/m","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":{"ranking":null,"competitionId":"454","__typename":"PrintLatestCompetitionResult"},"__typename":"PrintType"},{"id":"886714","name":"Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1","slug":"flashforge-adventurer-5m-ad5m-filament-cutter-comp","ratingAvg":"5.0000000000","likesCount":312,"liked":null,"datePublished":"2025-02-18T00:42:53.383557+00:00","dateFeatured":null,"firstPublish":"2024-05-21T04:03:28.999115+00:00","downloadCount":1985,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-18T00:42:53.411668+00:00","image":{"id":"4108201","filePath":"media/prints/886714/images/8944989_d2c18f8b-dc49-4128-99e8-53006c768dc6_6bafbd14-efe6-477e-af55-0620e043eed5/2024-05-20-flashforge-adventurer-5m-ad5m-filament-cutter-printables-thumbnail.jpg","rotation":0,"imageHash":"EwgGBYAGcEdEq5iolshpcwaHUnII","imageWidth":3840,"imageHeight":2880,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1091761","name":"VACUUM HOSE HANGER (DOUBLE) - for hose up to 63.5 mm (2.5 inch) v.1.2","slug":"vacuum-hose-hanger-double-for-hose-up-to-635-mm-25","ratingAvg":"0E-10","likesCount":294,"liked":null,"datePublished":"2024-12-05T19:09:06.640441+00:00","dateFeatured":null,"firstPublish":"2024-11-30T01:26:11.488605+00:00","downloadCount":537,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-12-05T19:09:06.673374+00:00","image":{"id":"3821479","filePath":"media/prints/1091761/images/8283904_972a292e-5360-4cf7-8400-b2f1f169aaf0_b6ed301c-15b5-4031-9add-b1d4a2918e36/vacuum-hose-hanger-double-for-hose-up-to-635-mm-25-inch-01-w-text-new.jpg","rotation":0,"imageHash":"XfcJNYT7d2h4V4VfkZt4eCcIZYNw","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"834097","name":"Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1","slug":"flashforge-adventurer-5m-ad5m-improved-spool-holde","ratingAvg":"4.3750000000","likesCount":261,"liked":null,"datePublished":"2025-03-19T03:56:45.291109+00:00","dateFeatured":null,"firstPublish":"2024-04-06T11:16:35.038966+00:00","downloadCount":2283,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-19T03:56:45.315370+00:00","image":{"id":"2997472","filePath":"media/prints/834097/images/6428116_ba606c1e-cf26-482a-9e6a-724d2b59360e_25fdfae1-d59f-4fe7-88ed-015365af08a2/2024-04-06-flashforge-adventurer-5m-ad5m-improved-spool-holder-side-mount-spool-holder-video-thumbnail-tall-for-printables.jpg","rotation":0,"imageHash":"WggGDYJYJWtWd3mQh5qZUZ+n8e5o","imageWidth":1920,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"172907","name":"Featherboard for woodworking, no supports needed, with 1/4\", M5, & M6 options for knobs & track slides","slug":"featherboard-for-woodworking-no-supports-needed-wi","ratingAvg":"4.8333333333","likesCount":251,"liked":null,"datePublished":"2024-03-01T10:09:49.084674+00:00","dateFeatured":null,"firstPublish":"2022-04-17T02:17:07.435909+00:00","downloadCount":1051,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-03-01T10:09:49.536087+00:00","image":{"id":"801797","filePath":"media/prints/172907/images/1626916_e0979239-1366-4d0d-b898-4072e62feee5/large_display_10-img_1111_172907.jpg","rotation":0,"imageHash":"XRkKLYK3Z4ile3awhneoeAp2gjBZ","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"127223","handle":"design8studio","verified":false,"dateVerified":null,"publicUsername":"Doug Joseph (design8studio)","avatarFilePath":"media/auth/avatars/f9/f987137e-af53-4f4b-8be3-221e832eff39.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":true,"stripeAccountActive":true,"membership":{"id":"0-127223","currentTier":null,"__typename":"UserMembershipType"}},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}