E3D V6 Vise for Assembly or Hot-Tightening the Nozzle
A small vise to hold an E3D V6 hot end for assembly/work
0
10
0
75
updated May 17, 2024
Description
PDFA small E3D V6 Vise for Assembly or Hot-Tightening the Nozzle.
Hardware required:
2 ea. M3 x 35 screws
2 ea. M3 nuts
2 ea, M3 washers
I added aluminum duct tape to the base for some heat resistance since my main use for this is to hot-tighten the nozzle. I have a separate control board/screen with the E3D V6 quick-connect wiring harness & cooling fan so that I can perform the hot-tightening procedure off the printer.
Printed in Atomic Bug-Eye PLA.
Tags
Model origin
The author marked this model as their own original creation.
