She-Ra Sword STL for 3D Printing

STL files for a full sized 3D printable prop sword from She-Ra and the Princesses of Power season 5. Fully modeled for 3D printing by me, Resonant Cosplay.

This is not a physical model. This is only a download for the STL files for your 3D Printer.

<>
THESE FILES ARE FOR PERSONAL USE ONLY, NOT FOR RESALE OR PROFIT.

Perfect model for adding that extra element to your cosplay.

Length when fully put together: 45.25"L

WHAT YOU WILL NEED AFTER YOU PRINT THE FILES:
- One 12" metal rod (I bought mine from The Home Depot)
- Twelve 3 mm x 18 mm metal Dowel Pins (You can buy a pack of 100 off Amazon)

PRINTING RECOMMENDATIONS:
I have printed these out in PLA and used super glue to adhere the pieces together, but PETG should work just as well.

Blade Pieces:
- These do not need supports at all!
- I do recommend using a brim around them for more build plate surface area and to prevent curling.

Hilt Pieces:
- These will need supports!

If you have any problems with printing or have any suggestions for the model feel free to contact me.