Container for Pills or similar

I made a Container for Pills or similar. Printed in different types of PLA.

Tne compartments have small ears on one side to prevent warping at that point.

You can turn on supports. Those will remove easily. 

You can print the small pins without a rim.

The small pins are press-fit. Insert the side with the chamfer. A big plier is helpful here.

The outer ring has a very tight fit too, just press hard :)

i used a 3mm insert and a 3mm screw.

The “Arrow” is glued on with tiny dots of CA

Last i glued some small rubber-feet beneath the box.