Tippmann TMC Dual Mag Cover

These dual mag covers have the purpose of keeping dust, paint, rain ad sand out of your mags wile using Dual mags on your TMC.
in combination with the Tippmann mag coupler by FiXeL666
https://www.thingiverse.com/thing:3065303

link to video

_UPDATES__
Downloads made after 11 August 2019 will have a extra file for the Right side. so it works for the StG 44 Shroud. it's called: TMC DM COVER Right M4 Knurled nut StG 44 edition

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Resolution:

0,2mm

Infill:

40%

Filament:
Jupiter PETG

Notes:

shell: Wall line count: 4

the cover plate will not need any supports.
note that you will get some noticeable stepping with a 0.4mm nozzle.
but personally did I not mind this.

the left side comes in 2 versions. one where you will need yo use a longer Tippmann bolt.
and one where you will use M4 knurled nut and a M4 30mm bolt + M4 washer

Post-Printing

make sure the cover plates can move freely and use 70mm long metal pins with a diameter of 1.5mm to attached this to the mounting parts.

Parts needed for the right side: 2x M4 Knurled, 2x M4 washers, 1x M4 40mm bolt, 1x M4 30mm bolt.

Parts for the Left side: 1 Tippmann bolt 25mm long.
or 1x M4 knurled, 1x M4 washer, 1x M4 30mm bolt.

Category: Sport & Outdoors