HackRF Portapack H2 stand

Here is a stand for the Portapack that doesn't block access to the charging and audio connectors on the bottom, and doesn't obscure the writing on the front.

I printed with 15% infill, skirt but no brim. Supports are required.

Please note: This stand will only fit the H2 version of the Portapack with a metal case that looks exactly like the photo. If you have an H4M version, check out this stand.

There is a second version that has a slot for a DS type stylus that is 87mm long, 5mm dia. If you print this version you should block supports for the stylus slot, or enable the option in your slicer to only print supports on the bed.

If you don't have a suitable stylus, you can download one from here to print.