Modern Gunsafe Storage

No More scratching or having to remove all your guns to get to the back one.

This is a three piece upgrade that allows you to retrofit your safe to store your long guns.

There are three pieces

-Base (PETG)

-Holder (PETG)

-Pad (TPU)

I added pads that be printed on a Multi material printer or one a single extruder.

For single extruder machines, print the PETG and TPU parts seperatly and simply slide it in.

You can use a dab of super glue to secure it but I didnt have to.

PRINT WITH A 0.4mm Nozzle otherwise nothing will fit.

I attatched the Fusion360 project file so you can edit the holders to make then shorter or narrower depending on your guns. 

I have the tractor supply winchester 36 gun it fits about 4 long guns. The gap betweent the vertical dividers is 14 inches, I left 1 inch of wiggle room to get it just right.

To attatch the wall holders I used a combination of velcro on the back and also a strap that I stapled in place on the sheet rock.