Facom 8 piece T-handle hex key set holder

Holder for hanging and easy access to your Facom/USAG set of T-handle style hex keys.

Sizes in my set: 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10

Materials needed for this build:

• 4 heatset inserts M3
• 4 M3 x 25mm hex bolts 

Model consists of 2 pieces, heatset inserts go into the lower part. I printed this in ASA and this part tends to warp a bit on the corner due to it's size and small bed adhesion surface. I used a brim for this part, might not be necessary with different filament.

Facom/USAG has different styles of the T-part of the key, i added a picture of the type i modelled this for. Please check if they are the same before printing.