Mountain Logo

If a table-sized model is too small for you, print out several parts of the model in the same color and assemble them into a larger composite model. It is recommended to use cyanoacrylate glue to glue the model parts together. The gluing process should ideally take place on a glass surface. This will allow you to easily separate the model from the glass with a spatula in case of glue overflow. Attach the model to the wall using adhesive double-sided tape. If you choose to attach with a nail or self-tapping screw, print and glue wall_mounting.

To achieve the wow effect, you need to place an LED strip on the back of the decor.