Jaguar Recurve Crossbow Triple Rail Mount

Jaguar Recurve Crossbow Triple Rail Mount adapter turns your single rail into three rails so you can pimp out your…
3
18
0
311
updated November 18, 2021

Description

PDF

Jaguar Recurve Crossbow Triple Rail Mount adapter turns your single rail into three rails so you can pimp out your crossbow with useful accessories. Its got holes for screws and things, but it should be a tight enough fit that you can just tap it onto the rail with a small hammer, this is assuming you have your printer dialed in appropriately of course. Probably best to print it in PETG some other suitable material, PLA does work also though. You will need to use supports under the central rail if your printing it flat on the bed and you may need to finish the inside of the rail slot with some hand tools.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20


Filament:
Prusa PETG

Notes:

0.2mm layer height, supports on bed, 0.4mm nozzle-x, 3 x walls and 6 layers top and bottom for good strength.

Category: Sport & Outdoors

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License