LRS 350 36 Housing

LINKS TO MATERIALS BELOW!

This is my housing for the Meanwell LRS 350 36 power supply. It's intended use is for housing the power supply needed for these DIY Sim Racing Active Pedals. 

There are 3 holes that are labeled T (throttle) B (brake) C (clutch). The TBC holes are 7mm in diameter, which is enough space for 2 16AWG power cables to fit in each hole. I secured the wires using hot glue. Included are also 1 and 2 hole versions.

Yes, the design is odd. I eventually intend on attaching this to my extruded aluminum cockpit (whenever it gets delivered to me… any day now…), so in the near future I will be adding details that will allow you to attach this to any 4080 extruded aluminum. 

This is the wire I used  https://www.amazon.com/dp/B07SG23DT1?psc=1&ref=ppx_yo2ov_dt_b_product_details

IF YOU ARE USING THIS FOR THE DIY ACTIVE PEDALS PLEASE USE A FUSE THAT IS RATED FOR AT MOST 7 AMPS AND AT LEAST 3 AMPS!

This is the C13 female panel I used for this design. 

ANY OTHER C13 PANEL WILL NOT WORK WITH THIS MODEL WITHOUT MODIFICATION https://www.amazon.com/dp/B09LGX9MQX?psc=1&ref=ppx_yo2ov_dt_b_product_detail

I've included .step files, as well as a Fusion Archive file (.f3d) that includes the entire project and it's history if you wanted to fix, modify, or make fun of how awful my design process is. I don't care! Have fun! Don't sell my stuff or I'll find you! Then again, who would pay money for this?