This is a simple stand designed to collect any water that may leak out of a small dehumidifier.
Mini Dehumidifier Stand - Body
Rafts: No
Supports: No
Layer Height:
0.2mm - .4mm Nozzle
0.3mm - .6mm Nozzle
Infill: 15-20%
3 perimeters
3 tops
3 bottoms
Mini Dehumidifier Stand - Grate
Rafts: No
Supports: No
Layer Height:
0.2mm - .4mm Nozzle
0.3mm - .6mm Nozzle
Infill: 15-20%
3 perimeters
0 tops
0 bottoms
Infill Pattern: Honeycomb or Triangles will work
Filament: PETG or ABS, PLA is NOT suitable
The author marked this model as their own original creation.