Raspberry Pi 4 Sleeve case

Little bit of a tight fit but might have been the printer I used. Nice case.

Great design, snapped together nicely

it was a bit tight fit, but works

Printed at "only" 50mm/s for better fit. Pretty :)

Prusament PLA

I like the design, but I had to do a bit of postprocessing to get it to fit, and now it's a permanent addition to my raspi and won't come off ever again. I should have maybe scaled it up a bit... (edited)

Printed at 102% and deleted one of the corner supports to accommodate my heat sink. Otherwise cool Design. Love the 90s vibe with it printed on white and space gray.

Printed at 102%. Love it

Best case for RPi. I made several in the classic Prusaesque orange/black color scheme.

The best designed sleeve style case for a Pi4 I have tried. Fits great, and no extra hardware.

cool case but:
- had to print at 101% as others suggested
- had to use a heatgun because it still didn't quite fit (my printer might be not that well calibrated tho)

- it could've been designed more forgiving, with bendable Parts that click into place, for different tolerances
- the case is pretty airtight which might trap too much heat
- you could've posted the .step file here too, instead of just on thingyverse

otherweise good job, i like it.