Airsoft ASG Scorpion Evo MP5 Mag Lower

MP5 Lower for the Airsoft ASG Scorpion Evo.

MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018

This also disables the empty mag cut-off

What you'll need:

2x M3x20 screw + nut

2x plastic self-Tapping Screws

2x Ball-point Pen Spring

I recommend heating the self tapping screws with a lighter before threading them into the mag release, to melt in the threads 

I made some video assembly Guides:

I put a Lower Assembly gif in the pictures of this model
Installing the Lower

You'll need to print one lower, a BB Tube, A Mag Release, and A Mag Release Button.
The Selector shims are not necessary, but recommended to quickly get the alignment right.