USB power does not insert correctly with micro usb.
I think I might make my own design, a full enclosure. This is a simple great start.
Raspberry Pi mount for SSD
Made to mount my Raspberry Pi 4 with a heat sink onto an SSD. It can also work without the heat sink (or with other…
25
111
2
1121
updated November 15, 2021
Makes
Comments
View one more comment
@nhchiu yeah that is true but I don't have M2 nuts! that is why I use the standoffs as nuts 😋 would need 4 more standoffs. 😁
@robomaniac Ah! Got it.
This magnificent build uses very little material and prints fast. Five stars for ingenious design.
I took the chance to get rid of the bottom cover of the RPi armor, making way for air to flow freely in between the RPi and the 2.5" SSD.
Used: 4 pcs M3x20mm and 12 M3 nuts. (4 of them nuts connected between the board and the mount)
@eliasjonsson Thank you for making the review and sharing your setup!