Green Dragon Evolution

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA 3DLine Black Transmission Distance: 0.6
PLA 3DLine Gray Transmission Distance: 3
PLA 3DLine Green Transmission Distance: 2
PLA 3DLine White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #11 (0.96mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Jade White for the rest.