New Case! June 2024.
Print only the case you want… GPIO or NON-GPIO
Features
Compression fit (no screws needed)
MicroSD card access and Camera access
Finger Nail assembly/disassembly NO SCREWS!
Instructions
1 Zero board press into Base
Board should sit flat on the small cylinder platforms. Press with fingernails for an even and fine line part line.
2 (For GPIO versions) Insert GPIO pin cover into Top pocket opening.
3 Top fits snugly over base.
4 Install MicroSD card.
REMEMBER TO REMOVE MICROSD CARD before Disassembly!
The author marked this model as their own original creation.