Fix a printed holder onto the top of z-axis of the 3D printer with two M5 x 80 mm screws.
Cancel the filament sensor with a piece of filament.
Requirements:
Paper tube: ID = 23.3 mm, OD = 27.3 mm, L = 95.0 mm, from a 50 m Saran Wrap package in Japan
Pillar: spool.stl
End cap: endcap.stl
screw: two M5 x 80 mm
screw: one M6 x 90 mm
Material: PLA
Infill Density: 15%
Build Plate Adhesion: Non
The author marked this model as their own original creation.