In the example I printed the “RollCover” with grey PLA at 0.15mm layer height and 3 perimeters. All the other parts are printed with black PLA at a 0.3mm layer height and 3 perimeters. See the slicer example photos on how to orientate the parts on the print bed.
The “HolderBodySingleSide” is only the left side of the body. In the slicer you need to copy and mirror it over the x-axis to get the right side. Use the “HolderBodyConnectPin” to connect(or glue) both sides together.
Enjoy!
The author hasn't provided the model origin yet.
