Hulk rage - Magnet paint

HUEFORGE Instructions: Consider to buy me a coffee😁❤ or give a Boost🙏

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.
if you want green frame, swap again on green for the last 3-4 layers

If you want any modifications or variations, feel free to ask, if you have specific requests write to me privately, and I will do my best to fulfill your desires❤