Gridfinity Parts trays

These are my Screw/Parts trays.  I was looking for something to keep all the screws and what not organized while I took apart laptops and what not.  I designed it to be just big enough for a screw in the tray.  

The taller trays can have a few screws in and the part they go with on top.  

The trays are stackable (not with parts on them) so you can leave your screws on them if you have parts on order. The 5.5mm depth trays are stackable as long as the parts are less than 10mm (like an SSD).

The compartments are 10mm x 10mm and the depth on each is 1.5mm for the short trays, 5.5mm on the tall low depth trays, and 15.5mm on the tall trays.

The 5.5mm depth trays are made so you can have screws and parts in them and still stack other Trays on top of them.