OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount

OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount

• print with TPU / TPC for better flex and sealing
• TPU: shore 60-70D, TPC 30D or 40D
• gasket optional
• when printed with TPU foam like Varioshore, beware of changing sizes
• mount with 2x M5 screws. drill 3 holes (2 for screws, 1 center for antenna cable)
• mount the antenna first to the mount with 3x M2.5 screws. then attach the GPS cable from inside the the mower cover through your center hole and the printed mount.
• optionally use https://www.amazon.de/gp/product/B09PTYF16J for the antenna socket for better flexibility on connections/disconnections of an extension cable. The mount already has the needed spacing for it under the antenna piece