Handle fan 4015 K1 Max

Housing for a 4015 fan cooling the extruder (stepper motor) in my K1 Max printer. Fortunately, you will need two M2x10mm screws to attach the housing to the two protruding squares under the motor, I know that in the new version with a washer it is not
cooling is needed, but the engine still heats up after this modification, it is much better. I had a 4015 12v fan, but I think other fans (5v - 24v) will also work. One more model is very delicate, I screwed one up carefully. The casing protrudes beyond the dimensions of the upper glass, mine is raised on the casing by about 40-50 mm, so it doesn't affect anyone without a casing for the upper glass.Google translator is hopeless, best regards.