ASTRONAUT IN THE MOUNTAINS, ORIGAMI HUEFORGE

Let's imagine an astronaut at night, enjoying the mountains...

Now let's imagine it as if it were origami

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Eryone Matte Navy Blue Transmission Distance: 6.3
PETG JAYO Gray Transmission Distance: 8.4
PLA+ Sunlu Silver Transmission Distance: 6.9
PLA PolyLite Cream Transmission Distance: 7.4
PLA Default White Transmission Distance: 5

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Navy Blue
At layer #16 (1.36mm) swap to Gray
At layer #20 (1.68mm) swap to Silver
At layer #27 (2.24mm) swap to Cream
At layer #32 (2.64mm) swap to White for the rest