Macbook Wall Holder / Mount

This is a wall mount bracket to hold a macbook pro or other thin laptop.  Mounts on screws on a board or wall surface.  I put a small piece of double sided tape on the back surface, toward the bottom as well so I slide the bracket onto the screw and then press in place.  Use rubber or felt pads inside the contact area of the bracket with the laptop if you wish to avoid possible abrasions on your device over time.

I wanted to get my laptop off my desk but still have accessible when I need to work elsewhere.  This is oriented so the rear exhaust points up… heat rises.

USB alignment/couplers - https://www.thingiverse.com/thing:2875142  These are useful so you can keep track of what plug goes in which jack.  External monitors seem to enumerate to ports so plugging your monitors into the correct port helps ensure your monitor arrangement in the MacOS remain consistent.  I put a black dot on the backside of the brackets as well so I know which way to plug these in.  Helpful addition!

Velcro cable management bracket - https://www.prusaprinters.org/prints/77309-velcro-strap-anchor  (link to velcro straps in there too)

This is mounted with screws and the brackets slide down onto the screws.  I mounted these on a board so I could mount all of my hardware on the board itself and then mount the board to the wall with just two screws so less cleanup/repair when removing the board from the wall.