Lamp #4

A honeycomb pattern lamp shade that can use Lamp Base#1,

 https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e1.

185 mm height x 85 Width
 

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:
     https://www.amazon.de/dp/B0B5MPL9MX

The slicer settings for the stand and screw-on cap:

.20 mm Standard and 

(All standard settings and speeds, Random seam settings

Filament:  Prusament Galaxy Black

The shade itself was printed using a white PLA.. 

Prusament Vanilla White

The slicer settings:

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Random