Drill bit stand - parameterised

A parameterised drill bit stand that can be mounted on a tool board.

Features include

• with mounting holes to screw it to a tool board.
• with a label to print and stick on the front.
• that can be changed to hold your set of bits.
• that can be changed to hold other things, such as router bits.

Open SCAD is used to create the model and the SVG for the label. Set either drawLabel and drawBody to true to generate the label or the body.

The label can be exported as an svg and then printed using Incscape or any other tool that handles vector graphics correctly.

The stand can be screwed to any tool wall using two 4mm screws.

Two examples for drill bits 1-6 and 6.5-10 are already generated.

You will need these tools to create the stl and print the labels:

• Open SCAD
• Inkscape