MMU3 original Prusa Enclosure Buffer Plate Holder

It works well and Is a simple design. Assembly instructions would be helpful just to show on what side the nuts go

Just what I was looking for to keep the buffer plates tidy.

Very nice design, was using the bottom mount first when I setup the MMU, using the spool holders that came with the kit.

Was using up way too much space so I designed my own wall mounted spool holder and switched to the top mounted version.

Really happy with my setup now, thanks for sharing your design :-)

Printed in Prusament PETG CF

Appena finito di stampare e subito dopo averlo montato. Anche io l'ho stampato speculare perchè avevo la necessità di metterlo a sinistra. Tutto ha funzionato regolarmente, senza intoppi. Ottimo esteticamente e come salvaspazio. Quei pallini neri che si vedono sono dei feltrini per evitare di rigare la fiancata trasparente. Grazie per averlo condiviso!!! :-) (edited)

Is it possible to move this to the left side of the enclosure instead of the right?

It fits perfectly. Thank you. I mirrored the holder so I could mount it on the left side. Printed with Prusa Orange PETG. (edited)

Works great, thank you! I. Immensely helped in keeping the MMU footprint as compact as I wanted.

The screws needed are:
3 M3x8 to screw the MMU frame onto the enclosure
3 M3n for the MMU frame
4 M3x12 to screw the MMU frame onto the MMU buffer plate holder

Many thanks! Great and simple design. I mirrored the part to fit the left side of the printer.

3DQF PETG (edited)

Worked great, simple solution for the MMU3 and the enclosure

Love the side mount of the Buffer holder! :)
Dont mind the Buffer anymore with this! :)
Many Thanks! (edited)