Clamps to hold projects on the Dremel Drill Press. The bottom connection is designed to slide in the drill press baseplate. The top can be turned to any angle to grip the project. The front face is textured and although I printed mine in PLA, they might be work in TPU for a softer grip.
The knob was designed to sit up high so turning them is easier.
You'll need to print 4 sets.
Each set has:
1 top
1 bottom
1 knob.
You will also need:
4 1"-1/4" bolts that glue into the knob
4 1/4" nuts that glue into the bottom
4 washers
I've included both STL and STEP files of all parts.
The author marked this model as their own original creation.