Barbapapa Family Nesting Dolls

The entire Barbapapa family (9 dolls), snuggly fitting together.
18h 14m
9× print file
0.20 mm
0.40 mm
356.00 g
40
233
2
962
updated June 13, 2024

Description

PDF

The entire Barbapapa family (9 dolls), snuggly fitting together. You'll have to forgive the paint job, my 4-year-old insisted on helping!

There are 3 visual variations: The male members of the family, the female ones, and a special hairy one for the center piece, Barbouille. The 9 dolls have been modeled to have the same wall thickness and connector height, despite their different sizes.

All pieces should be big enough not to pose a choking hazard, but maybe err on the side of caution if your child has an extra-large pharynx.

Printing

I provided PrusaSlicer 3MFs with the below settings already configured. If you prefer using the STL files, please pay attention to the following:

  • Seam: Make sure to use Rear for the seam position, to avoid unsightly lines on the face. I used a random seam for Barbouille, since he's supposed to be hairy.
  • Brim: Contact surface is pretty small, use a brim.
  • Supports: You probably need supports for the inside of the top parts. I've added some support enforcers in the 3MF files.

 

Tags



Model origin

The author marked this model as their own original creation.

License