The 3Dprinting Workbench wouldn't fit this monstrosity of a printer, so I had to put it on sideways. Naturally, the screen now needed to be turned by 90°, to still be accessible.
I made two versions: One taking up fairly little space, but facing more forward, than upwards. The other is angled further up, which improves accessibility if the table/workbench is lower.
Installation notes:
- Attach to screen first, then to the printer
- you have to reroute the wiring through the cable management clip as it will be too short otherwise
Printed at 100% with (neglible) supports. Need to change orientation so it lays on the flat side.
The author marked this model as their own original creation.