3D Models Hobby & MakersElectronics

ESP32 D1 Mini Snap-Together Case

5 reviews
Quick print to house ESP32 D1 Mini. Snaps together with cutouts for USB, LEDs and a paper-clip hole for reset.
39m
1× print file
0.20 mm
0.40 mm
7.00 g
45
358
4
2470
updated November 2, 2021

Makes

Comments

T 1
TheMentor
@TheMentor_718424

is there an easy way to make this case taller? i want to fit inside a ESP32 D1 Mini and a LD2410 mmWave sensor.

thanks

Reply April 29, 2023 at 8:54 PM
Blakadder 20
Blakadder
@Blakadder
Reply 1 like March 2, 2023 at 9:09 PM
Ender 3 S1
Obi 15
Obi
@Obi_291539

Tolerances were a little tight. I had to trim the top of the USB port to get it to fit in the case. I really like how it snaps together though.

Reply June 18, 2022 at 9:45 PM
P 1
pittfan
@pittfan_248502

I printed a number of these for housing my ESPresense sensors around my house and they all worked very well.

Reply 1 like June 15, 2022 at 1:00 PM
N 20
nathan.o2
@nathano2

Snaps together well, printed in ABS

Reply 1 like June 9, 2022 at 12:57 AM
Lorenz H 20
Lorenz H
@LorenzH
Reply 1 like May 21, 2022 at 5:25 PM
B 10
blalor
@blalor_51788

Handy little case! Thank you for the design.

Reply 1 like April 14, 2022 at 10:03 AM
Chris Crewdson 13
Chris Crewdson
@ChrisCrewdson_3900

Fits perfectly.

Reply 1 like March 4, 2022 at 9:02 PM
All comments loaded