Unscrew the panel clip every time you want to fix something inside the voron chamber is not fun so that is why you are here.
These will replace the left, right, and top panel clips. Use same screws same t-nuts but you need 4 pcs of 6x3mm neodymium magnet per set of the clip or 96 pcs for all.
Printer:
VORON 2.4
Rafts:
No
Supports:No
Resolution:
200
Infill:40
Filament: ESUN ABS+ Black
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.