wire/rope/cable clamp with hanging loop

Remixed from: https://www.thingiverse.com/thing:5579277 

I needed to be able to hang things from an overhead cable. I added a ring to the bottom of one side of the rope/cable clamp so that I could do just that!

I've been hanging flags that move around quite a bit in the wind, using just PLA and it has held up very well for over a year now. Made with m5 bolt and nut

fits 1/16 inch  (1.6mm) vinyl coated wire rope vinyl coated to 3/32 inch (2.4mm)

I did not adjust the "nut part" of the clamp from the original design just uploaded it for ease of use.

The loop is added which changes the function drastically