Supermicro Rack Ear Handle

Printed in PETG with a 0.6mm nozzle and 90% Infill.

You'll also need 2x M4x5mm Countersunk-Screws. If you don't already have some, you should buy the 20mm long ones and cut them to length with a Dremel. (Notice: the Thread should be 5mm long, if you include the Head of the Screw it's around 8mm total)

The Handle works pretty well, I was able to lift a Supermicro CSE-829U (w/o drives) just by the printed Handles. Didn't break yet.

(3rd pic shows the original handle)